Vacuubrand CVC3000

Introduction

Vacuubrand CVC3000 pressure controllers can be controlled via a serial (RS-232) interface. Note that even when the CVC3000 controller is embedded in a pump module, the serial port on the back can still be accessed via the bottom of the pump.

Note

The Serial connection parameters can be set on the controller to different values. To establish connection it is crucial that the settings on the controller match the parameters provided in the configuration file. As default, the following configuration is used:

• baudrate 19200

• parity none

• stopbits 1

• bytesize 8

API methods

See the device API reference for a description of the available methods.

Further information

Please refer to the manufacturer manual for more information.